Laser Generator Studio

Stands & Jigs · Laser Generator Studio

Laser Cut Stand and Display Generator, Plus Batch Engraving Jigs

Slot-together phone, tablet and cookbook stands, easels, retail and jewelry displays, medal hangers, plus bed jigs, tumbler cradles and a corner square for batch engraving.

Make a stand Free to try, no card needed
Stands & Jigs example design, previewed on real material
The Stands & Jigs studio’s own example design, shown in the app’s real-material preview.
Exports
SVG, DXF, PDF
Works with
LightBurn, xTool Creative Space, Glowforge
Materials
Birch plywood, acrylic, MDF

What it makes

The Stands and Jigs studio makes slot-together stands and displays, and jigs for batch engraving. Choose a product, set your material thickness and fit, and the joints are sized so the parts press together. Bed jigs hold many blanks in exact positions so you can engrave a whole batch at once.

Products

GroupProducts
StandsPhone, tablet and cookbook stands, display easels, card and coin holders
Retail displaysHeadphone stands, peg racks, brochure holders, tiered steps, coaster holders
Jewelry displaysWatch pillows, necklace busts, bracelet bars, ring cones, earring boards
HangersMedal hangers
JigsBed jigs for blanks, tumbler cradle, corner square

How it works

  1. Choose a product.
  2. Set the material thickness and fit.
  3. Adjust the size, lean angle or blank type.
  4. Export, cut and slot together.

Tips

  • Measure the sheet. Real plywood is often thinner than its label.
  • Tune the fit with the kerf calculator for joints that hold without glue.
  • Engraving tumblers flat? Pair the cradle with the tumbler wrap generator.

Batch tip: keep the bed jig on the laser and use the corner square to put it back in the same spot every time.

Export

Parts export as SVG, DXF or PDF, laid out for your sheet.

Questions

Do the stands need glue?

No. They slot together with joints sized to your material thickness and fit setting. A drop of glue makes them permanent if you want.

What is a bed jig?

A sheet with pockets cut to the shape of your blanks, such as dog tags, coasters or keychains. Lay it on the laser bed, drop the blanks in and engrave them all in one go.

What is the tumbler cradle for?

It holds a tumbler on its side, with supports at different heights so the top line of a tapered tumbler sits level for engraving.

Which retail displays are there?

Headphone stands, peg racks, brochure holders, tiered steps and coaster holders, plus jewelry displays: watch pillows, necklace busts, bracelet bars, ring cones and earring boards.

What material should I use?

3 mm birch plywood or acrylic for most stands. Use 6 mm for heavy items like tablets and cookbooks.

Materials and guides

Laser Cutting and Engraving WoodHow to laser cut and engrave basswood and birch plywood, MDF, hardwoods, pine and bamboo: choosing sheets, charring, smoke, grain, masking and finishing.Laser Cutting and Engraving AcrylicCast vs extruded acrylic, why blue diode lasers can't cut clear acrylic, and how to get flame-polished edges and frosted engraving.

Related laser tools

Laser Cut Box GeneratorFinger-jointed boxes sized to your real material thickness and kerf, with lids, dividers, handles and labels. Check the fit in 3D, then export every panel for your laser.Tumbler Wrap Generator for Laser EngravingName, monogram and full-wrap pattern designs for tumblers, mugs, glasses and bottles at the exact circumference. Tapered cups are pre-warped, and the rotary setup tab tells you what to type into your software.Laser Kerf Calculator and TestCut a small test, measure it with calipers and type in the number. The Calibration Center works out your kerf and saves it, ready for boxes, inlays and press-fit parts. Free to use.

xTool, LightBurn, Glowforge are trademarks of their respective owners. Laser Generator Studio is an independent product and is not affiliated with or endorsed by them.